Ram Units
Ram Units
The Ram Units are designed to ensure correct ‘priming’ of the pump fluid section inlet and to prevent material ‘cavitation’’ when high viscosity materials are pumped.
The units will accommodate industry standard 205 Litre Tote tanks, other sizes can be accommodated within the design scope e.g. 300 Gallon units.
A barrel/tote location is provided to ensure correct vertical alignment of the Ram plate.
The unit consists of two or four double acting air cylinders mounted vertically to a base. The air cylinders apply a force through the thrust rods to a heavy-duty ram plate which ‘forces’ the material into the pump fluid section.
The Ram plate has two tubular seals, which accurately fit the inside of the barrel, as material is used the ram plate descends, cleaning the sides of the barrel, reducing material waste to a minimum.
A pneumatic valve is included to raise and lower the ram plate.
Specifications
| 설명 | Unit |
|---|---|
설명Part Number | Unit107096 - 205L Twin Post Ram Unit |
설명Maximum Working Pressure | Unit6 Bar / 90 psi |
설명Cylinder Down thrust at 6 Bar | Unit107096 - 5.45 kN/1,225 lbf |
설명Ramplate Pressure | Unit107096 - 0.193 Bar/2.8 psi |
설명Stroke | Unit107096 - 950 mm |
설명Height Fully Extended | Unit107096 - 2600 mm |
설명Footprint | Unit107096 - 950 mm wide |
설명Typical Materials - 107096 | UnitHigh Viscosity PVC |
Accessories
| Part. No. | 설명 |
|---|---|
| 107050 |
Trip Valve Kit (205L) |
| 107053 |
Pump Control Unit |
| 107055 |
Pump Control Unit |
| 107056 |
Pump Control Unit |
| 107057 |
Auto Change Over Panel (205L) |
| 106960 |
Auto Change Over Panel (1000L) |
| 107866 |
Filter Housing (Stainless St) |
| 107867 |
Filter Housing (Carbon St) |
| 107876 |
Twin Filter Assembly (Stainless St) |
| 107877 |
Twin Filter Assembly (Carbon St) |







