E2-30 Pump
E2-30 Pump
The E2-30 smart pump uses a standard EExd 4 pole AC electric motor to drive the fluid section, for pumping paints, solvents and other suitable materials.
The unit combines conventional electrical hardware to achieve optimum operating performance at a lower cost. Running costs are much lower than compressed air driven models. When used with an optional smart card even higher savings in running cost can be realised, by running in a open or closed loop mode which delivers the paint to the user point at the correct pressure and volume only when needed.
The Model E2 Electric Pump achieves a reciprocating drive by using a cam and cam followers combined with a sliding carriage unit. Equal thrust on each stroke together with the special cam profile reduces fluid pressure fluctuations to an absolute minimum.
Specifications
| Description | Unit |
|---|---|
DescriptionNominal stroke | Unit50mm /1.97” |
DescriptionPart Number | Unit107071 (EU) |
DescriptionMax fluid pressure | Unit20 bar / 290 psi |
DescriptionFluid output @ 20HZ | Unit7.5 Litres / 2.0 US Gal |
DescriptionFluid output @ 80 HZ | Unit30 Litres / 8.0 US Gal |
DescriptionFluid Connections | UnitInlet and Outlet - 1 ½” Sanitary |
DescriptionElectric Motor | UnitEU/Japan: 400V 3PH 1.5 kW @ 50HZ 4 Pole |
DescriptionTotal weight of pump | Unit250 kg (550 lbs) |
Accessories
| Part. No. | Description |
|---|---|
| 192009 |
1½” Sanitary Clamp |
| 192800 |
Smart Card |
| 192008 |
1½" Sanitary Gasket |
| 192547 |
Pressure Transducer (4-20mA / 0-25 Bar) |
| 192720 |
Sensor Mounting Manifold 1½" Sanitary |
| 104048 |
Pressure Relief Valve - 1½" Sanitary |








